How To Make CBD Oil With Magical Butter

CBDISTILLERY

Buy CBD Oil Online

Easy guide how to make CBD oil from hemp flower and how to make CBD oil from isolate. Make CBD oil using coconut oil, magical butter machine or other Cannabis infused coconut oil offers many benefits and has many uses. Read on for a complete guide to making cannabis infused coconut oil. Magic butter machine oil is one of the best out there (check our review here). It's very easy to use and allow you to make hundreds of magic butter oil recipes. Here is our recipe of how to make cannaoil using the Magical Butter Machine. This magical butter machine coconut oil recipe. Magical butter machine oil…

How To Make CBD Oil With Magical Butter

Making CBD oil at home is more challenging than you might think. It took me three attempts and a couple hundred dollars worth of hemp flower to finally get the result I wanted. I’m here to share my easy process with you – filled with lessons learned and additional tools and advice.

I’ll show you how to use make full spectrum CBD oil at home using coconut oil (or any other carrier oil), or CBD isolate.

You’ll learn how to make CBD oil with a magical butter machine, or by using a double boiler. In my mind these are the two easiest methods.

I decided to make my own CBD oil because I was tired of spending more than one hundred dollars every two months for a new bottle of high potency CBD oil. A lot of people go through one bottle even faster than that.

Plus, making your own CBD oil is like making your own wine. It can be an enjoyable hobby, and since you can make large amounts pretty inexpensively, you can give some away as gifts.

The best part about this is that I’ll be answering all the questions I originally had in detail so you feel confident along the way. If I missed anything, feel free to reach out in the live chat or at [email protected]

The first section below outlines how to make full spectrum CBD oil using coconut oil (or another carrier oil) and hemp flower, while using either a magical butter machine or a double boiler.

The second section outlines how to make CBD oil from isolate. For the record, this guide also works for making THC oil at home. Same process.

Materials Needed:
  • Hemp Flower OR CBD Isolate to Determine Flower (or isolate)-to-Oil Ratio
  • Coconut Oil, Olive Oil, or Other Carrier Oil
  • Aluminum Foil
  • Magical Butter Machine OR Two Pots to Make a Double Boiler
  • Oven
  • Pyrex Measuring Cup
  • Strainer
  • Bottles or Container to Store Finished Oil
How To Make CBD Oil Using A Magical Butter Machine Or A Double Boiler:

Step 1:

Buy hemp flower that’ll be used to make your CBD oil. I love Berkshire CBD because they have a high quality flower selection, and you can choose hemp flower based on flavor profile and effects.

Step 2:

Determine how potent you want your CBD oil to be. In other words, how many milligrams of CBD per milliliter of coconut oil? I made a calculator to help you figure that out.

The strength of your CBD oil depends on knowing exactly how many grams of flower and cups of carrier oil to use.

Step 3:

Prepare your hemp flower by breaking it into small chunks. If you purchased popcorn size buds, also known as smalls, you don’t need to break them up, they’re small enough.

(click to enlarge)

I advise against grinding the buds because when it’s grinded it becomes very easy to overcook in the oven, which will ruin the oil. Plus, grinding destroys the terpenes which you want to keep intact.

If you purchased full sized buds, breaking each bud into 2-3 pieces is sufficient for decarboxylation. Look at the image above to get a good idea of the size.

Step 4:

Time to decarboxylate (decarb) your hemp flower. Wrap your hemp flower completely in aluminum foil. You can make air slits in the foil if you want, but it’s not necessary. This is how mine looked:

250 degrees for 30 minutes is all you need to properly decarboxylate (decarb) hemp flower.

There are a lot of websites and videos on the internet that tell you hemp flower should be decarboxylated for 1 to 2 hours. When I was still learning, I followed that advice and ruined my hemp flower. It smelled very bitter and the end product was not edible.

This study suggests 230 to 260 degrees is the right temperature for CBD decarboxylation. Mine went in the oven at 250 for 30 minutes and the finished product is exactly as I would have wanted, so I think you’re fine to ignore all the noise around decarboxylation and stick to 250 for 30 minutes.

The image above is what my decarboxylated (decarbed) hemp flower looked like after 30 minutes at 250 degrees. I would call it 1-2 shades darker than the original image above. It feels dried out and brittle.

I made oil with this flower above and the quality was similar to the high quality oil I used to buy from popular brands.

When you take the flower out of the oven, don’t uncover it. Let it cool for 10 to 15 minutes. If you take the foil off immediately, you may allow terpenes that are still heated to evaporate.

Step 5:

Magical Butter Machine:

Mix your decarboxylated hemp flower with coconut oil or the carrier oil of your choice. If you’re using a Magical Butter Machine you can pour the contents into the machine and set it to 160 degrees for 4 hours. The Magical Butter Machine will do all the work for you for the next four hours.

Double Boiler Method:

When using the double boiler method, you should probably grind up your decarbed CBD buds so they all fit into the oil. It makes things easier. Grind them up then mix them into the carrier oil in your pan. Don’t grind the hemp buds before you decarboxylate them.

I try to make high potency oil, and so there’s always a lot of flower for the amount of oil I need to use to get the right potency. Sometimes I find it unavoidable that I have to add an extra 1/4 cup of carrier oil to get the flower fully soaked and make sure I’m really getting all the CBD out of it.

To make a double boiler, you simply need a pot filled with boiling water, and a pan that sits on top of the pot. You put your flower and oil in the pan. Let the oil and flower “cook” for 2 or 3 hours (I did two hours and it was fine). Stir once every 15 or 20 minutes during that time.

Step 6:

Strain your finished CBD oil into a pyrex cup. You can use the strain bag that came with your Magical Butter Machine, or you can use a regular kitchen strainer. The point is to get the plant matter separated from the oil.

Squeeze the strainer bag so that all the oil is squeezed out of the remaining plant material and goes into the pyrex cup. If you’re using a kitchen strainer, simply take a spoon or fork and press down on the plant matter to squeeze the remaining CBD oil from it.

Filtering CBD Oil Sediment:

You’ll notice there will still be sediment in the oil even after straining it with your choice of strainer. You can let it settle, then use a dropper to move the oil from the pyrex to the bottles without sucking up the sediment.

You can also pour the oil from the pyrex until the sediment starts to get close to the spout. At that point you can use a dropper to remove the remaining CBD oil without taking the sediment with it.

See also  3chi CBD Oil

I don’t think it’s worth running CBD oil through cheese cloth or coffee filters. You end up loosing a lot of oil in the process for a little bit of nothing, and it can get messy.

The sediment isn’t really anything to worry about, and it’s incredibly fine sediment, it’s not as if there are scooby snacks in your oil. I kind of accept it as part of the full spectrum CBD oil makeup and dont mind having a tiny bit of it in my finished product.

Add Flavoring to Your CBD Oil:

Now is the time to add flavoring to your CBD oil. If you don’t want to add flavoring, skip to step six. Buy some flavored extract and mix it into your oil. Some common extract flavors for CBD oil are Raspberry, Lemon, and Cinnamon.

Just add the extract into your finished CBD oil. Some people add it with one hour left in the cooking process. I add it at the end and I’m fine with it that way. Just mix it up and you should be good to go.

Step 7:

Pour the finished CBD oil from the pyrex cup into your storage container of choice. I used 60ml glass bottles that are pretty cheap on Amazon, but if you’re using the oil for cooking you’ll probably want to store it in one large container.

Need High Quality Hemp Flower For Your Homemade Oil? Click Here
How To Make CBD Oil From CBD Isolate

Step 1:

Determine how much isolate and oil you need. That depends on how strong you want to make the CBD oil. You can do this by using my CBD Potency Calculator.

For example, 1 gram of CBD Isolate = 1,000mg of CBD. If you mix 1,000mg into 60ml of oil (1/4 cup), you’ll end up with a CBD potency of 16.67mg per 1ml of oil.

Step 2:

Take your coconut oil, or other carrier oil, and place it in a Pyrex measuring cup. Measure out the correct amount of CBD isolate and pour it into the oil. Mix for a minute or two, and pour into your storage bottle or container.

Some people heat the oil after mixing in order to facilitate CBD dissolution into the oil. This is not a necessary step, but if you want to use heat, I would suggest pouring your mixed oil into a mason jar, then placing the mason jar into a pot of steaming (not boiling) water. Keep it in there for maybe 20 to 30 minutes and stir it a few times during that period.

That’s all there is to it. Making CBD oil from isolate is very simple and much easier than making CBD oil from hemp flower.

Notes about the finished CBD oil:

My home made full spectrum CBD oil came out great using both the Magical Butter Machine and the double boiler method. The end product had a green color as you would expect.

In comparison to regular hemp flavored oil from a major brand, it still tastes different. I would say it’s less pungent. The difference is likely because major brands make their CBD oil via a CO2 extraction process. With that said, I still found the effects to be the same.

As I mention in the disadvantages below, it’s hard to make above 40 mg/ml strength CBD oil at home simply due to there being too much flower for the oil to absorb. Other than that I’ve been pretty happy with my results.

What’s the difference between CBD Oil from Isolate and CBD Oil from Hemp Flower?

The difference between the two methods is that CBD oil from isolate is not full spectrum. CBD isolate does not contain other cannabinoids that create a more noticable entourage effect when consumed.

There are a few reasons people prefer making CBD oil from isolate versus full spectrum CBD oil from hemp flower. One reason is that some people are worried the trace amount of THC in full spectrum CBD oil will make them fail a drug test. Another reason people prefer to make CBD oil from isolate is that some people don’t enjoy experiencing the entourage effect that full spectrum CBD oil provides.

Why CBD oil is so expensive

CBD oil is so expensive when you buy it from an online store or a brand because it requires a lot of time, equipment, and processing to make in a safe manner before it reaches the (online) store shelf.

First, the hemp flower must be grown, dried, and trimmed. Next it has to be packaged and shipped to a processor who turns the hemp flower into oil, usually with a CO2 extraction method. Last, a sample of the finished CBD oil or CBD product needs to be shipped to a laboratory that tests for potency and contaminants.

This is a long and expensive process, which is why making CBD oil at home can save you so much money. A couple ounces of hemp flower and some MCT oil are all you need to end up with several months of high quality homemade CBD oil.

Is it legal to make your own CBD oil?

In the United States, it is legal to purchase hemp flower with a THC concentration below 0.3% or purchase CBD isolate to make your own CBD oil. I can not speak to the law in locations outside the United States.

Advantages of making CBD oil at home:

1. The biggest advantage is cost savings, especially if you’re going through a large amount of CBD (I see people say they take 150mg to 200mg per day). The more you use the more you can save by making CBD oil at home.

2. It’s also nice to make something and consume it yourself. It can be a bit of a hobby if you make CBD oil at home often. Buying flower in bulk, making large amounts, and having extra to give away to family or friends is a nice benefit.

Disadvantages of making CBD oil at home:

1. The taste is somewhat different from the store brand CBD oils. It’s different even when you’re comparing unflavored homemade oil to unflavored store brand oil. Some may see that as a negative if you have a favorite flavor or brand.

2. It’s hard to make high potency CBD oil at home because you usually end up needing a lot more flower than the oil can absorb.

The highest potency I’ve been able to get, based on the minimum amount of oil needed to soak up all the flower, is about 40mg/ml. So if you’re used to 50 mg/ml or 65 mg/ml, you ultimately need to consume 1.25 to 1.5ml instead of 1ml.

3. You can’t tell for sure what the exact CBD oil potency will end up being without special equipment. You can do the calculations beforehand using my CBD oil potency calculator, and get a very good idea, but you’ll never really know for sure if you decarboxylated all the available CBDa or not.

With that said, after using my finished product I’d say it compares very closely to my high potency CBD oil from popular brands.

Another disadvantage is the smell when decarboxylating. There are other more complicated methods to deal with the smell if it bothers you that much. It doesn’t bother me.

Now that you’ve made your CBD oil, you can keep it stored in a bottle, or check out some great cannabis cooking sites like WakeAndBake.co or LaurieAndMaryJane to learn how to infuse your oil into your favorite recipe.

See also  Does CBD Oil Smell
Need High Quality Hemp Flower For Your Homemade Oil? Click Here
Other Ways to Use CBD

Looking for other ways to use CBD? Check out my detailed article about different methods of using CBD.

Mix CBG with your CBD Oil

I’ve been familiar with CBG for a while. The main benefit for me is that it takes away a lot of the undesirable effects of CBD, such as drowsiness, foggy head, and laziness.

When you get a minute check out my article outlining how I add CBG to my CBD to really elevate the experience.

You may also want to read about other unique cannabinoids like THCp!

Grow at Home Too!

Want to grow your own hemp or cannabis at home? Check out my guide that summarizes everything you’ll need. It’s a lot, but it’ll save you a lot of time and questions!

How long does it take to make CBD oil at home?

Depending on the method you choose to make CBD oil, it could take anywhere from 10 minutes to 5 hours. The fastest method is making CBD oil from isolate. The slowest method is using a magical butter machine.

How much does it cost to make CBD oil at home?

The total cost of making CBD oil depends which method you choose and how much CBD oil you want to make. Making CBD oil from isolate is the least expensive, and making full spectrum CBD oil from hemp flower is more expensive. Both methods are considerably less expensive than purchasing CBD oil from a store or website.

How long do I decarboxylate (decarb) hemp flower?

Completely wrap hemp in foil and place in the oven at 250 degrees fahrenheit for 30 minutes. There are other recommendations on the internet that range from 90 minutes to two hours, but I find those to be excessive, possibly even ruining your hemp flower. I made very good CBD oil when decarbing at 250 degrees for 30 minutes.

Can you make THC oil with the same method used to make CBD oil?

Yes, follow the exact same steps in this guide to make THC oil.

Do you need to filter sediment from CBD oil with coffee filters or cheese cloth?

No, you only need to strain the big chunks of flower out of the CBD oil. The sediment can remain in the oil, or be carefully removed with a dropper once it settles.

Does homemade CBD oil taste the same as store bought?

Homemade CBD oil tastes different than store bought CBD oil. One reason is because many large companies use CO2 extraction to make CBD oil, whereas the homemade method is more of a heating and slow cooking method.

Is it legal to make your own CBD oil in the United States?

It is legal to make your own CBD oil in the United States.

How strong is homemade CBD oil?

You can make your homemade CBD oil as weak or strong as you desire by using the right ratio of hemp flower or isolate to carrier oil. You can use my CBD potency calculator mentioned in this article to determine the correct proportions for any desired strength.

Is making CBD oil difficult?

If you don’t have guidance it’s possible to ruin the CBD oil, but once you read the right advice from somebody who has successfully made their own CBD oil, the process is easy. Making homemade CBD oil does not take much effort once you know exactly what to do.

Why are CBD products and CBD oil so expensive?

CBD oil is so expensive when you buy it from an online store or a brand because it requires a lot of time, equipment, and processing to make in a safe manner before it reaches the (online) store shelf.
You can save money on CBD oil by following this guide to make your own CBD oil at home.

My name is Nick, and I’m a home grower who spends time writing about indoor growing tools and setups. My goal is for 420ExpertGuide to be a one stop shop for indoor growers to find the information they need.

How to Make Cannabis Infused Coconut Oil

Are you looking for a smooth lip balm? Or perhaps you’re more into creating an easy to use skin rub?

Whatever you’re looking to make, they all start with the same thing and that’s cannabis infused coconut oil .

Mixing cannabis oil with coconut oil is going to be one of the best decisions you’ve ever made. Below we’re going to share with you some of the most common ways to make these oil, whether you’ve got a crockpot or mason jar on hand. We’ll also offer some reasons why coconut oil makes the best mixing base for cannabis oil.

It’s crucial that you pick the one that’s going to work the best for you. If you want to use the method that’s the easiest, purchase your Magical Butter Machine now.

Our machine helps you to get the highest quality final product in the least amount of time. And when you’re done, clean up is a breeze. What more could you want?

Ready to get cooking on this deliciously scented mixture? Let’s get started!

Why Is Coconut Oil the Best Mixing Agent?

Coconut oil is a diverse and healthy fat has been used for generations and for a multitude of reasons.

Looking for an oil to moisturize your lips, hair, or skin? Use coconut oil.

Want something to boost your morning coffee? Coconut oil.

Even if you want to use a healthier oil when cooking or baking, again coconut oil is the one to reach for.

But, there are some health benefits that go far beyond the average coconut oil use that you need to know about.

Added Health Benefits

When you ingest coconut oil , the fatty acids present in the oil help you burn fat quicker and easier. Once this fat is burned, your body can then turn it into energy to use. Because of this absorption method, coconut oil can help to speed up your body’s metabolism.

Coconut oil , as we stated, is also useful when you’re cooking. The reason for this is that it is saturated fat, which is known to be able to handle higher cooking temperatures without comprising the structure of the oil. This means you can turn up the temperature without risking burning the food that you’re cooking.

When we said that you could use coconut oil to moisturize your skin, we weren’t kidding. Check out our list of topicals and lotions you can make here .

Now that you’ve got a better understanding of why coconut oil makes the best mixing agent, let’s get into some of the best ways to make your cannabis-infused coconut oil. But first, let’s review one step that’s crucial to the entire cannabis oil creation process.

Decarboxylating the Flower

While it won’t completely ruin your recipe if you don’t decarb it, we recommend going through the process of decarboxylation before proceeding with the recipe to get the most out of your cannabis.

One of the main reasons you’re going to want to decarb the cannabis is to ensure that you’ve got active THC levels when you’re ready to use it. Decarbing improves the function of the cannabinoids found in cannabis, making it more potent for the person to use it.

Magical Butter Machine Method

The first method we’re going to take a look at is going to be the easiest to use and quickest to clean up. To use the Magical Butter Machine method, these are the ingredients you need:

  • Coconut oil
  • Decarboxylated Cannabis
  • Magical Butter Machine
See also  Does CBD Oil Expire

If you thought it was going to get harder, you thought wrong. These three ingredients are all you need!

Step 1

Place the coconut oil into the Magical Butter Machine.

Step 2

Next, add the cannabis that you’re wanting to use inside as well. You can use as little as an 1/8th and as much as 3 ounces in the machine at once. Just make sure you have the right ratio for the dosage you want.

Step 3

Set your temperature to 160°F. After this, select the option for a 2 Hours and the machine will go to work.

Step 4

Once the process is complete, put on the provided Magical Glove and pour the mixture through the Purify Filter that came in your kit. Squeeze the filter to ensure all oil has been collected.

Step 5

Now you’re ready to use your cannabis coconut oil in any recipe you wish!

Mason Jar Method

Before you can begin the process, gather all your materials, including:

  • Coconut Oil
  • Mason jar with the lid
  • Cannabis (decarboxylated)
  • Crock-Pot
  • Cheesecloth

Now here are the steps to take to create your infused oil.

Step 1

Fill the crockpot with water about halfway. Then take the mason jar and fill it with equal amounts of your cannabis and coconut oil, sealing it with the lid.

Step 2

Set your crockpot to the highest setting. Place the mason jar inside the crockpot, burping the lid about half an hour through the process.

Step 3

Strain the finished product using a cheesecloth. Store the finished product until you’re ready to use it.

Double Boiler Method

Here’s your ingredient list when using this method:

  • Double boiler
  • Coconut oil
  • Decarboxylated cannabis
  • Cheesecloth

This ingredient list has fewer items than the recipe that we listed before.

Step 1

Fill the bottom half of your double boiler. Make sure that you don’t overflow the bowl because once it starts to heat up, it could spill. Bring the boil to a simmer, careful to avoid bubbling temperatures.

Step 2

Next, you’ll want to place the top half of the double boiler over the bottom half. Make sure the bottom of your top bowl isn’t touching the water in the lower half of the double boiler.

Step 3

Add the coconut oil and cannabis to the top half of your double boiler. You’re going to cook it for approximately 90 minutes, total stirring it every 10-15 minutes.

Step 4

After the cooking time is over, pour your mixture into a cheesecloth. Using the cheesecloth, squeeze out all the oil into your storage container. Then store the mixture in either your freezer or refrigerator until it’s time to use it.

Crock Pot Method

Ingredients needed to pull off the crockpot method include:

  • Crockpot
  • Strainer
  • Cheesecloth
  • Thermometer
  • Cannabis

Make sure you’re aware that this method may take longer from start to finish than other methods featured on our list.

Step 1

Before adding your ingredients to the crockpot, you want to make the change to grind down your cannabis flower. Grinding it will make it easier to strain, but you don’t want to grind it into a powder.

Step 2

Set your crockpot to high, and then add water. After doing this, you’ll add the coconut oil to the crockpot and allow it to liquefy before moving on.

Step 3

Begin to stir in the cannabis flower that you ground in step 1. Stir carefully and slowly until all the flour has been saturated in the water/oil mixture. If there isn’t enough water in the pot, slowly add more water as needed.

Step 4

Place the lid on top with a thermometer inside. Check the pot until it’s reached an internal temperature of 250 degrees. Once it’s reached the desired temperature, turn the crockpot to the low setting.

Step 5

Allow the mixture to remain in the crockpot for upwards of 18 hours. During this time, ensure the temperature remains below 270 but higher than 250. If it gets too high, the mixture will begin to burn.

Step 6

After it’s done cooking, place a piece of cheesecloth over your storage container. Pour the mixture into the cheesecloth and squeeze to get out all the oil. Seal the container in the refrigerator to rest overnight.

Step 7

In the morning, when you check on your mixture, you’ll find that the oil has risen to the top and solidified. Remove the foil and discard the excess water. Store your solid cannabis oil-infused coconut oil until you’re ready to use it.

Adults only (18+)

This website contains adult material and is only suitable for those 18 years or older. Click Enter only if you are at least 18 years of age.

FREE SHIPPING ON ALL PURCHASES OVER $25

  • Dry Herb Vaping Guide

How to Make Cannaoil? A magical butter machine oil recipe

October 22, 2018

Magic butter machine oil is one of the best out there (check our review here). It’s very easy to use and allow you to make hundreds of magic butter oil recipes. Here is our recipe of how to make cannaoil using the Magical Butter Machine.

Having a cannaoil in my house is one of the essential things that I can’t live without, like cumin. Or TV. Or weed for that matter. And if you haven’t discover the magic of eating your cannabis, you’re about to have a complete different journey than the one you’ve already had.

Cannaoil is very easy to make, especially if you have the Magical Butter. We do sell it on our 421Store, and I’m not saying this because we sell it. It’s the best and easiest way to make cannaoil. So if you want to get into making your own edibles using cannaoil or cannabutter, I highly recommend buying one of those.

  • Skill level: Easy
  • Cycle time: 1 Hour/Oil
  • Yield: 2-5 cups/475-1.18 L

Saving Note: Use discount code ‘mb421‘ to get 30% off your Magical Butter. Limited quantity. Discount code is active from today until Sep 30, 2018. Order here.

Ingredients

  • ¼-½ ounce/7-14 g of marijuana – Cup/240 ml*
  • 2-5 cups/475-1.18 L cooking oil (preferably coconut oil or olive oil; do not use ordinary soybean, canola, or corn oil)
  • 1 tablespoon/15 ml lecithinper cup/240 ml**
  • DO NOT ADD WATER!

*Check this Cannabis Cooking Calculator for the Perfect dose.

How to

Place the ingredients into your MagicalButter machine, and secure the head.

Press the temperature button, and select 160°F/71°C (or 130°F/55°C if using the machine at high altitude and/or in a dry climate); then press the 1 Hour/Oil

After the cycle is complete, unplug the unit at the outlet, and remove the head of the appliance. Put on your LoveGlove™, and pour the pitcher contents slowly through your PurifyFilter™ into formed molds, ice-cube trays, or other storage container.

Chef’s Notes

For best results do not pre-grind your weed. Also adjust the marijuana weight you will use for the cannaoil according to your personal preference. **Sunflower, rice, or soy lecithin is optional but highly recommended. Lecithin is an emulsifier used in the pharmaceutical industry for binding ingredients and increasing the potency of preparations. Lecithin comes in the form of granules, powder, and liquid; any form is sufficient. It is available at your local health-food or vitamin store.

You may find lecithin in capsules, but we do not recommend them, because they contain too many binders and fillers.

Here you got it. How to make cannaoil. Enjoy.

Source: Magical Butter Official Website (also check the Magicalbutter on our store here)

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.