How To Build Your Own Cannabis Grow Room
So, you have decided to grow your own cannabis at home. Nice one! Growing your own cannabis not only guarantees a continuous supply of wonderful weed, it also leads to a greater appreciation of the herb and the sense of a job well done. It is well documented that time in the garden is as beneficial as meditating, increasing one’s sense of well-being and even helping combat anxiety and depression.
Growing cannabis at home means having somewhere dedicated to growing. To produce enough weed to last from harvest to harvest, a minimum of 1m² is recommended. This will accommodate a number of smaller plants or one or two well-trained, or even scrogged, larger plants. All this is up to you; the yields in the end are similar, it just depends on whether you want a lot of variety with smaller yields per plant, or less variety and larger yields per plant. It is entirely up to the individual.
The height of the grow room is dictated by available space and lights being used. A single square metre is easily covered by most styles of grow light. Less height is required when using fluorescents, as lights can be kept closer to plants throughout the grow, whereas HID lights need more distance to avoid light burn and excessive heat buildup. You might want to blast your babies with a 1000W HID, but without appropriate height, this just isn’t possible.
SELECTING A SPACE
Everyone can find an easily accessible spare square metre somewhere in their home or apartment. Spare rooms, attics, basements, cupboards, and walk-in robes can be used to set up a grow space. Discretion is a key factor; fan noise, light buzz, and odour control each need to be considered when selecting a space to set up a grow room. An oscillating fan attached to a shared partition wall, for example, will drive your neighbours crazy with the noise and sympathetic vibrations.
An entirely light-proof grow room is absolutely necessary. In the first instance, light leakage can be annoying because grow lights are extremely bright. Light leakage can keep you awake at night if your grow room is a bedroom cupboard or set up in a spare corner of any inhabited room. At worst, it will advertise that you are growing weed to your whole neighbourhood.
Secondly, light leakage into the grow room can adversely affect plant performance. Once plants have been flipped to the 12-12 day/night cycle to induce flowering, light leakage can confuse plants and lead to a lower yield, hermaphroditism, or even failed crops due to light stress. All growers keep a keen eye out for male plants, but missing a few well-hidden bananas on females can ruin a whole crop by sending it into seed production.
Once your grow space is set up, do a test by turning on the lights and inspecting for any light leakage. Any cracks or holes that let light out will certainly let light in. When and if discovered, patch the holes with light-proof tape available at hardware stores or with at least two layers of gaffer tape—gaffer tape is semi-translucent, even the black stuff, so just one layer won’t do the job.
Most electrical equipment kept in a grow room, such as dehumidifiers, have quite bright micro-LED lights, which can do the same plant damage as environmental light leakage. Place a piece of tape over any lights on these types of appliances to ensure nights are the darkest of dark. Outdoors, the subdued light of the full moon has beneficial effects on plant growth, but this effect is difficult to translate to an indoor grow.
As it matures into resinous, fat buds, good cannabis smells—it’s as simple as that. Some weed even overpoweringly reeks and can stink out a whole room, a whole house, or even a street. It is easy to become used to that luscious aroma when visiting your plants often, and become convinced that the smell isn’t going further than your grow room—but nothing is further from the truth. A well-sealed grow room prevents aromas from disturbing neighbours or your fellow inhabitants.
A well-sealed grow room also makes climate control easier to maintain. Temperature control and dehumidifying/humidifying air rely on a sealed environment without any drafts. A stable environment is very important for optimum plant performance. A well-sealed room also acts as a quarantine cell for your plants, preventing any bugs, vermin, or airborne pathogens from entering. A single mouse can do a lot of damage to cannabis in only one night, especially to young plants, as they are voracious for nutrient-dense cotyledons and young stalks.
It should be noted that an airtight grow room is a low-budget solution. Spending more to set up an air exchange system will benefit your weed substantially and will pay itself back in the long run. However, airtight grow rooms are the ideal environments for experimenting with CO₂ enrichment for added plant performance.
Healthy cannabis requires moving air. Any grow room will require at least one oscillating fan to ensure air is continually in circulation. Moving air has a number of benefits for the cannabis plant.
At a minimum, moving air should ruffle all the leaves on a plant to ensure fresh air is available to the leaf stomata. In still environments, stale air can build up on the undersides of leaves around the stomata and hinder efficient gas exchange. This has the undesirable effect of inhibiting plant growth; stems will become weak, leaves will droop, and plant performance will be poor.
Moving air strengthens plants considerably; stems and stalks become thicker and more robust, and end yields will be higher.
Moving air also helps with the wet-dry cycle of the growing medium by supporting evaporation. Moreover, it prevents pathogens caused by moisture buildup on leaves as they transpire. Moulds like nothing more than a moist, warm environment.
With a higher budget, introducing an air exchange system stimulates better growth. Air exchange requires an inlet for fresh air and an exhaust for depleted air. With a higher budget still, incorporating a carbon filter into the exhaust system will keep the stink factor to a minimum.
Air inlets are passive and can take a number of forms; however, they are always situated in the lower part of the grow room, either in the floor if the floor is raised, or in a wall. The main consideration is light control when putting perforations into a grow room. A simple slot, vent, or series of holes will provide ample air intake, but can be indiscreet with light. Using a piece of ducting with a bend in it, or configuring a double wall arrangement, stops light escape. The easiest thing to remember is that light can’t go around corners, so introducing an arrangement with a bend of some kind keeps your grow discreet. Also, provide some kind of vermin barrier to dissuade any critters that want to get in and feed on your precious weed.
An air inlet means there will also be an air outlet or exhaust system, ideally with a carbon filter attached. Exhaust systems remove depleted air and heat from the grow room and draw fresh air in. Where possible, it is desirable to exhaust to the outdoors to prevent heat buildup in closed spaces, or to recirculate the same air back into the system. This can often be a challenge, but ducting is your friend when solving air distribution problems.
The capacity of an exhaust fan is dictated by the volume of the grow room. Length × width × height will give the volume of the grow room, and the manufacturer will recommend what fan will be right for the job. It is recommended to go up a size to ensure proper air exchange, and to accommodate any potential increase in the scale of your grow.
Cannabis thrives when the climate is controlled in regard to humidity and temperature, with certain parameters ideal for vegetation and other parameters ideal for bloom.
Humidity can be easily controlled with a dehumidifier; these are also available as double-action units that will add or subtract humidity as necessary. During vegetation, a humid and warm environment increases the rate of growth, while lower humidity and temperatures increase bud development.
Temperatures can be controlled with small, portable, reverse cycle AC units. Many humidity-modifying units and heaters come with built-in thermostats and hygrometers, so they switch on and off as the environment demands. Just set them, and rest assured your weed is booming at every stage; automating the whole thing makes growing life a lot easier.
SAFETY AND FIRE PREVENTION
Although most growers make it to harvest time without any mishaps, numerous horror stories document how bad things can get when an accident happens.
Although many cannabis growers like to keep their operation minimal, others like to use as many helpful gadgets as possible. But, even a small number of electronics in the grow space runs the risk of fire.
Water remains one of the biggest risks in the grow room when it comes to electronics. Water can interrupt an electrical current, potentially leading to a fire or electrocution. Try as hard as possible to keep electronics elevated above the ground in case of any water leaks.
Place a fan in your grow room to regulate temperature. Although this means even more electronics floating about, a fan will create a cool air current and help to prevent devices from overheating.
Using a ground fault circuit interrupter (GFCI) will help to stop electrical leaks when they arise. This piece of kit detects when electricity flows where it shouldn’t—in a pool of water or a human body— and breaks the circuit.
Keep your grow room as tidy as possible. Create a dedicated space for each piece of equipment, and keep wires running neatly using plastic zip ties. If you notice any damaged or exposed wires, repair them immediately.
Clear away all tools after using them to prevent any trip hazards. Keep your pruning shears, watering cans, and spray bottles packed away in a toolbox when not in use. Not only can tripping result in injury, but you might also land on your plants and cause some serious damage.
Although rare, you should be entirely prepared for a fire to break out. Grow room fires can destroy your property, put your life at risk, and also expose your herbal hobby to the authorities. Keep a fire extinguisher close by at all times in case your setup goes up in flames.
Instal a fire alarm in your grow room to alert you if a fire breaks out. Purchase a handheld fire extinguisher and keep it at the entrance to your grow room or tent. Purchase a model that contains dry chemical powder or CO₂ suitable to tackle electrical fires. Alternatively, purchase an extinguisher ball and position it above your growing space. Upon exposure to excess heat, these devices explode and release fire-retardant powder.
Now that you have selected a space that satisfies the demands for a healthy and discreet grow, it’s time to actually build your grow room. There are a number of solutions to create a grow room at home on a budget. This method uses a number of plastic-lined wooden frames to form the walls, base, ceiling, and door. When including a ceiling, supports for the grow lights will need to be incorporated. When dealing with existing walls and ceilings, BE ABSOLUTELY CERTAIN OF THE LOCATION OF ELECTRICAL WIRING. Also, tenants will need to consider the future repair of any surfaces that might be affected when building their grow room.
What you will need:
• A saw
• A stapler that can staple to wood
• Doubled-sided plastic sheet: one side black, the other side white or reflective like Mylar
• 4 small hinges
• A drill with a drill bit and a screwdriver bit
• 26 angle plates
• Plastic corner protectors (optional)
• Timber to suit: 4x4cm (or close enough) pine or similar softwood is easy to handle, strong enough, and cheap; your local hardware shop will certainly have this available in a variety of lengths
1. To create the top and bottom of your frame, you will require 4x 1.0m + 5x 92cm laths of wood.
– To create the sides of your frame, you will need 7x 192cm laths.
– To create the door, you will need 2x 1.0m laths + 2x 192cm laths.
2. For the top: To affix the laths, drill holes 2cm from each end, and one in the middle for the spax. Do the same to the bottom. For the door: Drill holes 2cm from each end in the 1m laths. Spax together with the vertical beams.
3. Now that you have created the bottom frame, take one of the 192cm laths, place it in one corner, and affix it with two angle plates. Repeat in each corner.
4. Now that all 4 are in place, place the top and affix all vertical laths to it with angle plates.
5. Measure out the middle between the vertical laths and affix your stabilising beams with 2 angle plates (3 for where they meet the supportive beam of the top frame).
6. Using scissors, cut a piece of plastic/Mylar that will overlap every edge of each frame. Staple the plastic into place on the overlapping edge using plastic corner protectors.
7. Locate the door and screw the 4 hinges into place.
8. Voila, your grow room is now ready to be fitted out.
For a start, we need to ensure that the space is made completely light-proof. In order to bloom to its peak the cannabis plant needs 12 hours of undisturbed night and 12 hours light.
How to Properly Distance Cannabis Plants in a Grow Room
Saturday August 29, 2020
A s many cannabis fans find themselves at home longer and longer, there’s plenty of time to think about picking up a new hobby. Maybe it’s finally time to tackle learning Spanish or Mandarin. Perhaps it’s time to get more into baking and see why everyone went so nuts over sourdough. Or it could be time to get into some indoor gardening and see how green your thumb is with a couple of cannabis plants.
The reasons for growing your own cannabis are numerous. There’s the price, the fun of seeing how your favorite plant develops, and the sense of satisfaction as you consume cannabis flower that you cultivated and harvested with your own two hands. As you’re looking around your available grow space with visions of blooming buds dancing before your eyes, there is one question that you should be considering: “How far away should I space my plants?”
Key Factors for Plant Spacing and Setting up a Grow Room
There are a couple of major factors that you need to consider when it comes to plant spacing – as well as growing in general – which we will delve into below.
What is the size of the grow space that you’re working with? Depending on the cannabis strain that you’re planning to plant and raise, the space you’ll need per plant could be anywhere from one to three square feet. This of course all depends on the set up of your lighting, your ventilation, and your pots, but we’ll cover that below.
The main thing you want to avoid is overcrowding. Your plants will branch out towards each other as they grow trying to reach their friends (or hog all the available light). When those branches start rubbing their leaves together they become especially humid and lose their ability to transpire efficiently. This can spread mold among your plants, as well as thrips, spider mites, and other problems. This can become especially problematic when combined with insufficient humidity and temperature controls as well as poor ventilation or air flow.
When considering your available space and planning out how many plants you’re looking to grow at one time, keep in mind that generally you want at least a six inches to a foot of room between the branches. Your actual spacing will vary, but this guideline gives the plants plenty of distance apart and gives you room to maneuver as you care for and harvest your little cannabis friends. You can space your plants closer than this, as long as they are not touching, but at least half a foot is a good rule of thumb.
Grow Containers and Pots
As a general rule, the larger the grow container, the larger your plant will become. While you’ll start with ½ liter pots for any seedlings, you’ll need to figure out the average plant height of the strain you’re growing in order to decide on which pot to use from there. This of course will also vary if you’re growing a shorter, bushier indica or a taller, thinner sativa.
If you’re only looking to grow a shorter plant that maxes out at two feet, you’ll need about a gallon sized pot. If you’re growing anything larger than that, you’ll need to start with a two to five gallon pot. As a pro-tip, while circular pots are more widely used and widely available (especially if you’re looking at a paint bucket set up), square pots will help you conserve space.
Your lighting set up will also have a big impact on your spacing, since your goal is to get as much of that artificial sun on every part of your plants as possible. The first thing to watch out for with your grow room lighting is what type of reflectors or hoods are on the appliance. If the hood is at too narrow of an angle, the bulbs are too deep set in the frame, or the reflective material is cheap, you’re losing a lot of available light while simultaneously wasting a lot of energy.
What you’re aiming for with the right reflector or hood is a range of 16 to 22 square feet of well-lit space per 1000-watt bulb. If you’re using a high quality, double ended bulb, you can get over a third more light intensity than a conventional HID bulb, but you’ll need to hang them higher due to the excess heat. With a quality double-ended bulb you can get a maximum of 27 square feet of usable lighting space.
If you’ve done your plant spacing correctly, there should be enough direct light shining through the canopy to illuminate most of the plant’s leaves.
The light should be able to shine through from the top to the bottom of each cannabis plant’s perimeter, as well as on all sides. If a majority of the plant is being shaded, it will harm the plant’s development. This will lead to less potent trichomes and less buds being grown overall, and can stunt your plant’s growth or leave it vulnerable to disease. If you find some of your plants are stuck in the shade, it’s time to separate your plants even further from each other.
Air Flow and Ventilation
For every 1000 watt bulb, you should also have at least one foot-tall oscillating fan to increase airflow. You should see a slight breeze that moves the leaves and branches on all parts of your plants, from the crown to the base. If there are some plants stuck in an area of stagnant air, you’ll need to move your plants further apart. Still air hanging above or around your plants can harm them by making the leaves too humid.
Every Plant is Different and Needs Attention
There’s no real hard and fast equation on how far you should keep your plants. Each plant is shaped differently, each strain has its own needs, and each room that you grow in comes with its own dimensions. However, making sure that your plants are far enough apart so that they don’t touch is the point to start from when it comes to home growing.
Once your plants are distanced, then it’s time to look at the other important factors mentioned above. Buy grow containers that will fit your room, adjust your plants so that they’re getting enough light on all sides, and be sure that there is enough room for a gentle but steady airflow throughout each plant from top to bottom. Once you meet all these requirements to keep every cannabis plant in your grow happy and healthy, that is your ideal distance to space your plants.
Do you have any tips for new growers looking to start their first round of plants? Share them in the comments below.
There are numerous reasons for growing your own cannabis: the price, the fun, and the sense of satisfaction as you consume cannabis flowers that you cultivated and harvested. But before you start growing there is one question that you should be considering: “How far away should I space my plants?”